• FAST AND FREE DELIVERY!
    SIGN UP AND SAVE 10%
    FAST AND FREE DELIVERY!
    SIGN UP AND SAVE 10%
    FAST AND FREE DELIVERY!
    SIGN UP AND SAVE 10%
    FAST AND FREE DELIVERY!
    SIGN UP AND SAVE 10%
    FAST AND FREE DELIVERY!
    SIGN UP AND SAVE 10%
    FAST AND FREE DELIVERY!
    SIGN UP AND SAVE 10%
    FAST AND FREE DELIVERY!
    SIGN UP AND SAVE 10%
    FAST AND FREE DELIVERY!
    SIGN UP AND SAVE 10%
  • General Information

    General Information

    How to Change Wiper Blades: A Step-by-Step Guide

    Why Changing Your Wiper Blades Is Important

    Over time, wiper blades wear out due to exposure to sun, dirt, and other environmental factors. This causes the rubber to degrade, leading to poor performance. When wiper blades no longer clear water effectively, it can result in reduced visibility during rain, snow, or fog, creating dangerous driving conditions. Regularly replacing your blades with quality products from Wipers Direct can improve your driving safety and extend the lifespan of your windshield.

    Fortunately, wiper blade replacement is among the easiest and cheapest vehicle maintenance tasks (especially if you order from us).

    In this guide, you’ll learn:

    That it takes less than 5 minutes to find the right blade replacements for your vehicle and the step-by-step process for changing universal wiper blades.

    How to Find the Right Wiper Blade for your Car

    With thousands of auto brands and thousands of vehicle models on the market, finding the right replacement parts can be a difficult job.

    To quickly identify the right wiper blades for your vehicle, just navigate to our homepage and enter your car’s make, model and year into our easy to use vehicle search box. We’ll take you right to the blades that perfectly fit your car and also show you instructions on how to fit them to your vehicle.

    How to Remove Old Wipers Safely

    Before attaching new wipers, you’ll need to understand how to remove old wipers without damaging the wiper arm or windshield. Here’s how to do it:

    1. Lift the wiper arm away from the windshield. Be sure it stays in an upright position, as it can easily snap back.
    2. Locate the release tab or button that holds the wiper blade to the arm.
    3. Unclip the wiper blade by pressing this tab and pulling the blade downward to slide it off the arm’s hook.

    Be cautious when the wiper arm is raised, as letting it snap back onto the windshield can cause cracks or chips. Use a towel on the windshield as a precaution and protection for the glass.

    These instructions will differ depending on car make & model so it is best you review the section in your car manual to confirm the correct method.

    How to Attach Windshield Wipers

    Once you’ve removed the old wipers, the next step is learning how to attach windshield wipers. Here’s the process for installing the new blades:

    1. Take your new Wipers Direct blades out of the package and align the new blade with the wiper arm’s hook.
    2. Insert the blade into the hook and pull it upwards until it clicks securely into place.
    3. Test by gently tugging on the wiper to ensure it’s firmly attached.

    It’s essential to install one blade at a time to avoid confusion, especially if your car uses different-sized wipers for the driver and passenger sides.

    How to Install Wipers for Maximum Efficiency

    Wiper blades vary in their attachment mechanisms, but the method for most vehicles remains consistent. Understanding how to install wipers efficiently can save time and ensure proper functionality. For Wipers Direct blades, ensure you’ve selected the right make & model on our website.

    Here’s a quick summary of the installation process:

    • Place the new blade in the direction of the wiper arm hook.
    • Slide the blade into place and listen for the click, indicating a secure fit.
    • Lower the wiper arm gently back onto the windshield.

    Now, your windshield wipers should be ready to tackle any weather conditions.

    How to Release Wiper Blades Without Struggle

    Learning how to release wiper blades is straightforward if you know where to find the locking mechanism. Look for a small tab underneath the wiper blade where it connects to the arm. Press this tab and gently slide the blade downward to release it from the arm. Once you’ve mastered this, changing wiper blades will be a breeze.

    How to Change Car Wipers

    Changing your car wipers doesn’t have to be complicated. Wipers Direct makes the process easier by offering high-quality, easy-to-install blades that are compatible with most vehicles. Here’s a quick guide for how to change car wipers:

    1. Lift the wiper arm and unclip the old blade.
    2. Slide the new blade into the hook or pin until it locks into place.
    3. Lower the wiper arm back to the windshield.

    Make sure the new blades are snug and properly aligned to avoid poor performance during rain or snow.

    How to Unclip Wipers Easily

    The clipping mechanism of wiper blades can sometimes be tricky to manage. To make it easy, follow these steps on how to unclip wipers:

    1. Look underneath the wiper arm for the small release tab. Sometimes the tabs might be on the front or sides of the blade
    2. Press the tab down firmly while sliding the wiper blade downward.
    3. Once released, you can easily remove the old blade and prepare for installation.

    How to Remove Car Wipers Without Damaging the Windshield

    If you’ve never removed wipers before, it’s crucial to know how to remove car wipers carefully to avoid any damage to your vehicle. Start by lifting the wiper arm, then press the release tab to slide the blade out of the hook. Always handle the wiper arm with care, as dropping it could scratch or crack the windshield.

    How to Fix Wiper Blades that Don’t Function Properly

    If your wipers aren’t working as they should, you might not need to replace them just yet. Learning how to fix wiper blades can save you both time and money. If the issue is with the wiper arm not making proper contact with the windshield, try adjusting the arm’s position. If the blades themselves are streaking or squeaking, replacing the wiper blades with high performance replacements might be the best option.

    How to Swap Wiper Blades

    Swapping wiper blades is a quick and easy task once you’ve got the basics down. Understanding how to swap wiper blades means you’ll never have to drive with streaky, ineffective blades again. Whether you’re upgrading to Wipers Direct blades or simply replacing worn out ones, follow these steps:

    1. Unclip the old blade by pressing the release tab and sliding it off the hook.
    2. Position the new blade and slide it into place until you hear a click.
    3. Lower the wiper arm gently onto the windshield.

    How to Change Window Wipers for All Weather Conditions

    For those who frequently drive in challenging weather conditions, knowing how to change window wipers is essential. High-performance wipers, such as those from Wipers Direct, are designed to provide excellent wiping in rain, snow, or even extreme heat. Make sure to inspect your blades regularly and replace them as needed to maintain optimal visibility on the road.


    FAQs

    How do I know when it’s time to change my wiper blades?


    When your wiper blades start leaving streaks, making noise, or failing to clear the windshield properly, it’s time for a replacement. Wipers should generally be replaced every 1-2 years, depending on use and weather conditions. Our wiper blades will last longer in the Aussie climate so do not need to be changed as frequently. We also have a 1 Year Warranty for added peace of mind.

    Can I change my wiper blades myself?


    Yes, changing wiper blades is a simple task that most car owners can do themselves without tools. Following a step-by-step guide like this one from Wipers Direct ensures that the process is easy and straightforward.

    Why are my new wiper blades still streaking?


    If your new wiper blades are streaking, it could be due to dirt or grime on the windshield. Make sure to clean both the windshield and the wipers thoroughly to prevent streaks.

    How do I choose the right size wiper blades for my car?


    Consult your vehicle’s manual or visit Wipers Direct, where you can input your car’s make and model to find the perfect size for your wipers.

    What if my wiper blades don’t snap into place?


    If your wipers don’t snap into place, double check that they are properly aligned with the hook or pin on the wiper arm. Sometimes a little adjustment is needed to ensure a secure fit. You can also add some WD-40 or other lubricant to help with fitment.

    Should I change both wiper blades at the same time?


    Yes, it’s best to change both wiper blades at the same time to ensure even performance. Some vehicles also have different sizes for the driver and passenger side. We recommend you pick your model on our website to find the perfect wiper blades for your vehicle.

    Share this post

    Written by David Harris

    David is a lover of all things automotive and has been working on or around cars for the past 15 years. As a wiper blade expert, David spends most of his time at Wipers Direct helping with testing, fitting and researching wiper blades.